Alpline cable protect chất đặc biệt dùng cho dây cáp

Alpline cable protect is a special re-greasing agent for ropes that efficiently protects wire ropes of ropeways against the effects of weather and wear, thereby increasing the service life of the rope. The product is pre-diluted with a special solvent in the factory, resulting in very good application. Once the solvent has evaporated, a thin, incredibly adhesive, water-repellent protective film is formed.

• DSB 80
• EN NORM 12385-8 ANHANG A

Description
MOTOREX ALPINE CABLE PROTECT is a special cable relubricant, which efficiently protects wire cables
for cable cars against the effects of weather and wear,
thus extending the service life of the cable. A special
solvent is used in the factory to dilute the product,
therefore making it very easy to apply. After the solvent has evaporated, the agent forms a thin, waterrepellent film with very good adhesion.
Advantages
• Prevents corrosion and internal wear of wire cables
• Extends the service life of wire cables
• Neutral vis-à-vis the most common inserts used in
cable and driving pulleys for cable cars
• No compatibility problems with the most common
basic cable lubricants
• Economical application, only once or twice a year

Field of application
ALPINE CABLE PROTECT is used for wire cables on
cable cars, ski lifts or cable lifts to transport materials.
Application
ALPINE CABLE PROTECT may only be applied to dry
and cleaned wire cables. A sprayer should be used for
application and the temperature should be >+10°C.
The quantity of oil required depends on the cable
manufacturer and the calculation formula. Wait for the
solvent to dissipate before starting up the system
again.
Note
• For stranded ropes:
<30 g per m² cable surface
• For fully enclosed carrying cables:
<15 g per m² cable surface
• Storage: Firmly closed, in dry and cool environment
• If possible, the product should be used up within a
short time
• Only dilute using ALPINE CABLE SOLVENT, if required.
Calculation formula:
G = (d x πx l x m)/ 1,000,000 +V = approx. Volume in kg
d = Cable diameter in mm l = Cable length in m
m = Volume needed in g pro m² V = Loss in %
Specifications
Tested according to norm:
EN Standard 12385-8 Appendix A
DSB 80