Shell Garia Oil 2619 M-9 dầu không chứa clo, lưu huỳnh màu trắng trong suốt

Shell Garia Oils are light colored, anti-mist, active sulfur cutting oils designed for use in moderate to severe
machining operations. Shell Garia cutting oils are available in different EP levels and viscosity grades to cover a wide
variety of machining operations and metals.

Shell Garia and the Shell Garia chlorine free “M Series” are transparent, light colored, active sulfur cutting oils
formulated using high quality refined base stocks with a naturally high viscosity index. The Shell Garia product line
varies in viscosity and extreme pressure level to cover the widest range of machining operations and conditions. Both
the “CM Series” and “M-Series” of Shell Garia cutting oils contain unique synergistic extreme pressure additive
systems that readily react at the chip-tool interface to form extremely effective boundary lubricating films which
reduce frictional heat and prevent metal-to-metal contact of the tool and workpiece. With the exceptions of Shell
Garia 422CM-36 and Shell Garia 422M-36, all of the product family contain fatty oil additives which increase the
lubricity and provides better surface finish of workpieces. All of these cutting oils possess excellent anti-wear and
anti-weld properties to help maximize tool life.
Shell Garia 421CM-12 and Shell Garia 421M-12 are low viscosity cutting oils, particularly suited for deep hole
drilling, grinding, and other operations where a low viscosity cutting oil would be preferred. Chips and grinding swarf
readily settle in Shell Garia 421CM-12 and Shell Garia 421M-12. Due to their low viscosity, loss of oil due to carryoff with the chips is also minimized with Shell Garia 421CM-12 and Shell Garia 421M-12.
Shell Garia 422CM-36 and Shell Garia 421M-36 can be used in a wide variety of operations where the machining
requirements range from moderate to severe. Shell Garia 422CM-36 and Shell Garia 421M-36 contain no fatty oil
and are, therefore, particularly useful in operations where surface finish is not critical. Shell Garia 422CM-36 is also
suitable for use in some of the more severe grinding applications where products containing fat could lead to loading
of the grinding wheel.
Shell Garia 621CM-36 and Shell Garia 621M-36 are useful in an extremely wide range of applications and are
particularly useful in difficult applications where surface finish is of extreme importance. Shell Garia 621CM-36 and
Shell Garia 621M-36 are particularly useful in form grinding applications and in deep hole drilling operations of
metals and alloys with very low machinability ratings.
Shell Garia 622S-34 can be used to machine even the most difficult of metals. Shell Garia 622S-34 is particularly
suited for the machining of titanium and its alloys since it contains no chlorinated additive that may react with the
metal and weaken the surface.
Shell Garia 623CS-52 and Shell Garia 623S-54 have the highest levels of EP of all the products in this series and can
be used where most other cutting oils fail. Shell Garia 623CS-52 and Shell Garia 623S-54 can handle the most
difficult operations and can machine the most difficult metals and alloys.
Shell GARIA products should not be used where staining of copper and its alloys is a concern.

Applications
• deep hole drilling
• broaching and tapping
• gear cutting and shaving
• reaming
• grinding, honing and lapping
• turning, planing, shaping, drilling and milling
Features/Benefits
• light transparent color and low odor properties
• excellent lubricity and extreme pressure properties
• chip-to-tool welding (built-up edge) minimization
• promotes increased tool life
• closer tolerances
• corrosion/rust protection of part and machine
• low smoke/mist tendencies